Hardware

Removable Eye Deck Plate/AssemblySpecifications: Eye Width 5/8" (16 mm)Eye Height 5/8" (16 mm)Eye Stock 1/4" (6 mm)Length 3" (76 mm)Width 3" (76 mm)Fasteners (4), 1/4" FH (6 mm)C/C A 2" (51 mm)C/C B 2" (51 mm)SWL 2250 lbs. (1020 kg)Weight 9.5 oz...

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

Mid-Rail Chock/Cleat Stainless SteelSchaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models...

Stainless 1-1/4" T-Track Slider - Eye Slide/LinedSpecifications:Track Size 1-1/4" x 3/16" (32 mm x 5 mm)Max. Boat Length 38' (10 m)Max. Boat Weight 12000 lbs. (5455 kg)Max. Sail Area 520 sq. ft. (48 m2)Length 4" (102 mm)Width 1-11/16" (43 mm)Height...

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb)...

Stainless Steel Cleat - 8"8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1...

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made...

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck...

Opening Luff Rope PrefeederFeatures:Single-handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for...

Asymmetric Carbine Hook - Length 170mm - 15/32"Features:Grade 316L stainless steel carbine hooksAsymmetrical shape to support higher loadsWith eye to attach a webbingApplications:For fastening applicationsIntegrated on Wichard...

Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") RopeSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while anchored by snubbing...